WiFi Smart Panel Firmware

Installation and start-up process

Update process

Note!
For Smart Panel WiFi with firmware version 5.9.1-2033, it is necessary to have CLU Smart Panel WiFi firmware version 1.1.5-2033 (or higher).

Note!
Before Smart Panel WiFi firmware update please update CLU Smart Panel WiFi firmware and interfaces database first. Update steps:
- CLU Smart Panel WiFi firmware update.
- Updating and reloading the XML interfaces database.
- Updating the Smart Panel WiFi firmware (according to the Smart Panel WiFi update procedure below).
- Execution of CLU Discovery.

Smart Panel WiFi firmware update via SD card:

Disconnect the Smart Panel WiFi from the power supply.
Download the .zip file and extract it.
Remove the microSD card from the Smart Panel WiFi memory slot according to the procedure presented in the manual or in the data sheet.
Paste the downloaded (unpacked) files onto the memory card, overwriting the existing ones.
Put the memory card back into the slot.
Connect the power supply to the Smart Panel WiFi module.
After powering and detecting a newer firmware version, the module will start the update procedure.
The software update process is signaled by alternating flashing of the upper diodes.
Correct completion of the update is confirmed by several blinks of all LEDs green.
In case of failure of the update process, the whole procedure should be repeated.

In case of constant failures while firmware update please contact with the Grenton Technical Support.